Product Details:
Minimum Order Quantity | 1 Piece |
Usage/Application | Hotel |
Voltage | 220 V |
Style | Modern |
Power | Electric |
Frequency | 60 Hz |
Automation Grade | Automatic |
Country of Origin | Made in India |
INSTRUCTIONS: 1. Push in the movable ring of the copper spray end at the handheld part, pull out the vacuum hose, then push in the black plastic ring on the right air hose.
2. Put the lotion on the suction hose nozzle, push it into the moving end, and connect the suction hose.
3. Place the cotton swab in the head and tighten it on the handle. Remove the cotton swab after each treatment.
4. Turn on the power switch.
5. Adjust the vacuum force through the vacuum regulator according to the following reference table, the force display on the vacuum gauge and confirm comfort with the customer.
6. Bring the surface of the skin into contact with the inclined area of the hand part. Continue to slide slowly. Do not leave the device in one place for too long, otherwise it may damage the skin.
7. Through the vacuum regulator from small to large, slowly adjust the product flow. For general use, don't set the flow to very high, just set the comfort level that feels good to you.
8. Gently stretch the skin with thumb and fingers and glide the instrument over the area of use 2-3 times. This is then traversed in different directions, the moving and polishing action can be applied at different positions.
Specification:
Item Type: Microdermabrasion
Material: ABS
Voltage: 100-240V
Colour: White
Suitable: for salon and home use
List of packages:
1 x Host
1 x Manual
1 socket
3 x microdermabrasion handle
9 x microdermabrasion probe
1 x Cotton Filter Bag M
1 x Cotton Filter Bag L
1 x suction hose
4 x small soft ring
2 x large soft ring
Product Details:
Usage/Application | Hotel |
Voltage | 220 V |
Power | Electric |
Frequency | 60 Hz |
Control Panel | Yes |
Automation Grade | Automatic |
Diamond Microdermabrasion Therapy: Diamond Microdermabrasion provides a Non-Surgical skin resurfacing procedure by using sterile diamond heads to peel and rub off the dead cells at the top skin layer followed by vacuuming/suction removing particles along with any dirt and dead skin. This procedure removes skin debris, scars, blemishes, wrinkles and uneven pigmentation of the skin. Vacuum Therapy: Vacuum Therapy Cleans dirty pores through suctioning tubes and increases blood circulation in the skin. Helps give elasticity in the skin and can decrease discoloration from acne and scars. There are 3 hose, they have the same function, you can choose any one to connect with the glass tube as you like. Spray Function:- Refreshing mist used after a treatment, you should fill 1/2 to 3/4 of the bottle with toner and push the top of the bottle with your finger to create a mist spray. It helps closing pores and soothing the skin. This is usually done after diamond microdermabrasion peeling and vacuum suctioning. Also calming down the skin after peeling and suctioning. The skin is sensitive after peeling and vacuum treatment, so the spray procedure is necessary. Specifications: Voltage: 220V/60Hz, Power: 65 VA Fuse: 2A, Suction Power???65-68cmhg, Package Size: 31x24x20cm, Gross weight: 2.5kg. Package includes: Diamond Dermabrasion Machine x 1, PVC vacuum hose 6*4 x 1 , Diamond pen x 2, Pens box & foam x1, Diamond Head x 9, Heads box & foam 1, Cotton Filter x 1package, Power cord x 1, Fuse x3. Warm Note: -Do not use on these areas: 1. Sensitive Skin; 2. Skin Rash; 3. Damaged, Inflamed, or Infected Skin; 4. Surgical scar less than 12 months old; 5. Skin Swollen; 6. The probes can not point to Eye ball; 7. Genitals. -Do not connect the hose of spray bottle to the vacuum socket, otherwise the toner will be sucked into pump and shorten the life of machine. Don't operate vacuum and spray at the same time.